Gradall Forklift Part

Gradall Forklift Parts - The Gradall excavator was the creation of two brothers Ray and Koop Ferwerda. The excavator was founded In the 1940's all through World War II, when there was a scarcity of workers. Partners in a Cleveland, Ohio construction company called Ferwerda-Werba-Ferwerda, the brothers faced a huge dilemma when so many men left the labor force and signed up in the military, depleting existing laborers for the delicate grading and finishing work on highway projects. The Ferwerda brothers decided to make a machine which will save their company by making the slope grading work easier, more efficient and less manual.

Their very first design prototype was a machine with two beams set on a rotating platform which was attached on top of a used truck. A telescopic cylinder moved the beams forward and backward that enabled the fixed blade at the end of the beams to pull or push dirt. Before long enhancing the very first design, the brothers built a triangular boom so as to add more strength. Furthermore, they added a tilt cylinder that let the boom turn 45 degrees in either direction. A cylinder was positioned at the back of the boom, powering a long push rod to enable the machinery to be equipped with either a blade or a bucket attachment.

Gradall introduced in 1992, with the introduction of the new XL Series hydraulics, the most innovative adjustment in their equipment since their invention. This new system of top-of-the-line hydraulics enabled the Gradall excavator to deliver high productivity and comparable power to the more conventional excavators. The XL Series ended the initial Gradall equipment power drawn from low pressure hydraulics and gear pumps. These conventional systems successfully handled grading and finishing work but had a hard time competing for high productivity tasks.

Gradall's new XL Series excavators showed more ability to dig and lift materials. With this series, the models were made along with a piston pump, high-pressure system of hydraulics which showed distinct improvement in boom and bucket breakout forces. The XL Series hydraulics system was likewise developed along with a load-sensing capability. Conventional excavators make use of an operator to select a working-mode; where the Gradall system can automatically adjust the hydraulic power for the job at hand. This makes the operator's overall work easier and also saves fuel at the same time.

As soon as their XL Series hydraulics came onto the market, Gradall was essentially thrust into the highly competitive market of machines meant to deal with pavement removal, excavation, demolition as well as other industrial work. Marketability was further improved with their telescoping boom because of its exclusive ability to better position attachments and to work in low overhead areas.

Click to Download the pdf

Forklift Parts

Cushion Tire Forklift Attachments

Cushion Tire Forklift Attachment - Cushion tires have a smooth profile on a firm tire with its tread being bonded to a steel ring to be able to shape the tire. The tire is pressed on the hub that is then attached onto the truck. These kinds of tires are ideal to utilize in smooth floor warehouses and are available...

More

---

Parts for High Reach Forklift

High Reach Forklift Parts - Lift trucks are utilized in almost all industrial construction sites and in warehouse operations and in boat yards. The reach feature of a lift truck is a vital component used in several applications like whenever a shelving system is being used to stack pallets. A lift truck operator will utilize the equipment's reach feature to...

More

---

Steer Axle for Forklift

Forklift Steer Axle - The description of an axle is a central shaft utilized for turning a wheel or a gear. Where wheeled vehicles are concerned, the axle itself could be connected to the wheels and rotate with them. In this particular instance, bushings or bearings are provided at the mounting points where the axle is supported. On the other...

More

---

Parts for Gas Forklifts

Gas Forklift Parts - In 1893, inventor Rudolf Diesel developed the diesel engine. The combustion engine works by providing the heat of compression to initiate ignition and burn the fuel. Next the fuel is injected into the combustion chamber. This design is in contrast to spark ignition engines, such as petrol or gasoline engines that rely on spark plugs to...

More

---

Clamp Forklift Parts

Clamp Forklift Parts - Normally utilized as forklift attachments in chemical and petroleum industries, the Drum Clamp, are specifically designed for the safe handling of regular 55-gallon drums. These attachments really enhance productivity in view of the fact that they are capable of handling as much as 4 drums for each load. Drum Clamps are likewise utilized in the food...

More

---

Trek Parts

Trek Parts - TREK Cleaning Machines is a machine maker who is passionate about the cleaning business. The company's founders, Jim Hartsock, Chris Knowlton and Bob O'Hara, have over sixty years combined experience with successfully manufacturing, designing, developing, marketing and offering customer support. The company's cutting edge flair is a reflection of the entrepreneurial style of the founders. They really...

More

---

Bale Clamps

Bale Clamps - Particularly handy for carrying or stacking numerous products, bale clamps can be utilized as a hydraulic lift truck or forklift attachment able to carry bales without a pallet. Bar arm clamps are extra accessories which could be attached to allow the operator to be able to carry cylindrical objects like for example rolls of carpet or paper....

More

---

Attachment for Skytrak

Skytrak Attachments - SkyTrak comes from a top-selling telehandler that is among the most popular in the business, providing a durable and operator friendly solution. There are 3 steering modes equipped on each and every model and likewise comes together with a Cummins engine. SkyTrak telehandlers could provide the power and the maneuverability considered necessary so as to deal with...

More

---